DESCRIPTION

DECOLAZUR ECO is protective and at the same time decorative stain coating suitable for all types of wooden surfaces. It can be used both indoors and outdoors and is suitable for wooden structures, windows, doors, fences … It does not contain organic solvents and is therefore recommended for use in residential areas. It is made on the basis of high quality acryl-hybrid binders, UV-resistant pigments and added waxes and other additives. It provides high quality weather and UV protection.

CONTAINERS AND STORAGE

Containers:
Metal containers 1 l, 3 l, 5 l, 20 l

Storage:
In dry and closed areas, at a temperature of + 5°C to + 35°C, in original / closed containers. It must not freeze.

APPLICATION

Tools: Brush (for water coatings), roller (short-haired).

Cleaning: Working tools should be, immediately after use, cleaned with water and detergent.

CHARACTERISTICS

• Weather resistance and UV protection
• High elasticity
• It preserves (visually) the structure of the wood and at the same time improves the color enhancement
• Indoor and outdoor use
• 10 standard color shades
• It gives the wood a silky finish and emphasizes its structure
• It has no unpleasant smell of organic solvents
• Fast drying

APPLICATION

Instructions for work: DECOLAZUR ECO is ready for use in the delivery form. Before using, Decolazur ECO must be well mixed. It is applied in two to three layers / coats depending on whether we apply it to new wood surfaces or renew old coatings.

The surface must be, before application, clean, dry and free of any impurities (oil, grease, dust, non-adhering particles …). The surface to which the coating is applied must be room temperature (+ 15°C to + 25°C) and at the same time must not be exposed to direct sunlight. During the first and second layer, grinding with fine sanding paper is recommended (granulation 180-220). The optimum working temperature is at temperatures from + 10°C to + 30°C and at relative humidity below 80%.

When renewing old coatings, the surface must be roughly sanded and all of the unpainted particles must be removed. A preliminary adhesion test is required / recommended.

When protecting new wood surfaces, as the first layer/application (as the wood basic protection) Decobase B or Decobase Cu are reccomended; they protect the wood preventively against biological pests, wood insects, blue stains and decay. The colorless shade of Decolazur Eco contains special UV filters and is not suitable for the renewal of dark shades as it can make milky look of the surface. Colourless shade should be applied in three coats / layers with recommendation that the first layer is with of a biocidal protection (Decobase B).

Use appropriate personal protective equipment.

Coverage: 1l is suitable for approx. 8-10 m2 in two layers; consumption depends on the final treatment of the wood surface on which it is applied, the types of wood and the application method and/or tools.

Drying: The first layer is dry within approx. 4-6 hours. The second layer is applied when the first application is completely dry. The drying time depends on the weather conditions (humidity, temperature) and the thickness of the film/layer.